If it’s two sticks having issues, check if they are on the same channel. You might actually be having issues with your cpu not being fully seated. I had a buddy who could only ever get two of four to work, and it was a bent pin on the mobo.
You should memtest each stick on its own. Change settings in BIOS to match the sticks advertised speed. You might have to toggle XMP/DOCP on or off. Probably check timings and voltage, too.
And you’re probably better off running 32 GB in dual channel mode. Unless you consistently use more than that, the extra speed is better than extra memory IMO.
47.8GB?
4 x 16GB but one of them is fully cooked and isn’t even recognised (leaving 48GB) another module is failing with errors.
They are also specced at 3200mhz but running at 1066 currently 🤷
Yeah, the time of death is a few years ago, they were cooked for a while…
Have you tried testing one module at a time at the original 3200?
If it’s two sticks having issues, check if they are on the same channel. You might actually be having issues with your cpu not being fully seated. I had a buddy who could only ever get two of four to work, and it was a bent pin on the mobo.
Wait, are you running it with the dead stick in?
You should memtest each stick on its own. Change settings in BIOS to match the sticks advertised speed. You might have to toggle XMP/DOCP on or off. Probably check timings and voltage, too.
And you’re probably better off running 32 GB in dual channel mode. Unless you consistently use more than that, the extra speed is better than extra memory IMO.